Weathering board does not rust, but in many situations, it is necessary to rust the board. Therefore, it is necessary to rust the board, which means covering its surface with a layer of rust to achieve color and aesthetic appeal. Generally speaking, when rusting weather resistant boards, professional construction and installation are required to achieve the unified performance and effectiveness of the weather resistant board. The common construction of rust on weather resistant boards is carried out by manufacturers. As long as your requirements are clear, we will construct according to the color of the weather resistant board and the main construction plan for the weather resistant board.

Key Operating Points

(1) Taking into account the specifications of the steel plate

The direction of sealing and the installation direction of the main beam should be taken into account to ensure accurate alignment. The requirements for vertical frame alignment should be fully considered, and special attention should be paid to the size treatment of each corner and node. The main factor that directly affects the quality of curtain wall installation is the quality of connection installation. By connecting the long holes of the clamping parts, the position of the hanging shaft can be adjusted to ensure the quality of the installation of the connecting parts.

2) Installation of rear embedded parts and connectors

The installation accuracy of corroded steel plate curtain wall connectors is very high. During the installation process of connectors, it is generally necessary to achieve three-dimensional precise positioning in the horizontal plane, including left and right, in and out, and up and down, and to achieve reliable connection between the curtain wall and the structural body.

(3) Customized rectangular steel profiles, vertical frames, and horizontal materials are commonly used as the skeleton material for corroded steel curtain walls. The sequence of installing the skeleton is from bottom to top. The steps are: the first step is to install the vertical frame, and the second step is to install the horizontal beam.

1) When installing a vertical frame, it is usually ensured that the end with the core sleeve faces upwards, and construction is carried out from bottom to top during operation. Firstly, fix the upper end of the first vertical frame, referring to the hanging component, and then fix the lower end; The second vertical frame is aligned with the core sleeve at the upper end of the first vertical frame as a reference, and the lower end is forcefully aligned. With a 20mm expansion joint remaining, the second vertical frame is fitted from bottom to top, referring to the suspension line or aligning the upper end of the installation beam for installation.

2) Installing a horizontal frame is a continuous installation process. When installing the first horizontal frame, the second horizontal frame is installed simultaneously. It mainly consists of three parts: i) installing the horizontal frame corner code; Ii) Install a horizontal frame shock-absorbing washer; Iii) It is the installation of the horizontal frame, which is fixed by stainless steel bolts penetrating the vertical frame (drilling holes) to fix these three parts at once, making the installation of the horizontal frame more complex. In addition, installing the horizontal frame not only requires exquisite skills, but also considers whether it is aesthetically pleasing.

The above are the installation steps and common sequences that need to be paid attention to during the installation of weather resistant panels. This is also the main point of operation, and the construction of weather resistant panels must be carried out in this way to achieve the unity of perfection and practicality.